manualshive.com logo in svg

HP 8591C, User Manual, Page: 224 / 373

Share
Download
HP 8591C User Manual Download Page 224

System Measurements Menu Map and 

 Descriptions

System Measurements 

 Function Descriptions

 

 

Allows you to specify the time and the date when testing is to begin for timed
measurements. The time is 

 in 24-hour, hour, minute format; the

date is 

 in year, month, and day format. If you do not specify a time,

the current time is used. If you do not specify a date, the current date is
used. If you specify a time earlier than the current time, the current time is
used. If you specify a date earlier than the current date, the current date is
used. If the date or time setting of the analyzer is incorrect, see “If the wrong
date or time is displayed” in Chapter 4.

Pressing CABLE TV ANALYZER , SYSTEM 

 , Timed Measure accesses

START TIME.

See Also

“Making Timed System Measurements” in Chapter 3.

 

 

Allows you to specify the time and the date to end the testing for a timed

measurement. The time is 

 in 24-hour, hour, minute format; the date

is 

 in year, month, and day format. If you enter a stop time that is

24 hours or greater, the stop time will be set to 23 hours and 59 minutes.

Pressing CABLE TV ANALYZER, SYSTEM 

 , Timed Measure accesses

STOP TIME.

See Also

“Making Timed System Measurements” in Chapter 3.

6-31

Summary of Contents for 8591C






















































































































































































































































































































































































Reviews:

No comments