manualshive.com logo in svg

HP 8591C, User Manual, Page: 228 / 373

Share
Download
HP 8591C User Manual Download Page 228

I

System Measurements Menu Map and 

 Descriptions

System Measurements 

 Function Descriptions

 

 

Allows you to select the current date as the start date or stop date for timed
measurements.

When you press TODAY'S DATE , the analyzer uses the date setting of the
spectrum analyzer. If the date or time setting of the analyzer is incorrect, see

“If the wrong date or time is displayed” in Chapter 4.

Press 

 TV ANALYZER, SYSTEM 

 , Timed Measure ,

START TIME to access TODAY’S DATE as the start date for the

timed measurement. Press Timed 

Measure , 

STOP TIME to access

TODAY’S DATE as the stop date for the timed measurement.

See Also 

“Making Timed System Measurements” in Chapter 3.

 

 

Allows you to select the current time and date as the start time and date for
timed measurements.

When you press TODAY’S 

 , the analyzer uses the time and date

setting of the analyzer. If the date or time setting of the analyzer is incorrect,
see “If the wrong date or time is displayed” in Chapter 4.

Press CABLE TV ANALYZER, SYSTEM 

 , Timed Measure,

START TIME to access TODAY’S 

 .

See Also 

“Making Timed System Measurements” in Chapter 3.

6-35

Summary of Contents for 8591C






















































































































































































































































































































































































Reviews:

No comments