HP 8591C User Manual Download Page 106

Page: 106 / 373

Channel Measurements

Making Channel Measurements

Step 5. Access the TV receiver mode (optional)

Press

RECEIVER,

Press CHANNEL SELECT , enter the channel you want to view with the
numeric keypad, then press

You can also select channels by using

the large knob or arrow keys on the front panel.

Press PIX

ON OFF to turn the picture and sound on.

Adjust the volume and intensity knobs for the desired volume level and
picture intensity.

To exit TV picture and sound, press any of the following: WINDOWS

or any

Additionally, the TV picture and sound can be accessed from within the
channel measurements mode by pressing WINDOWS

Channels can then be selected with the numeric keypad, then pressing

(ENTER). You can also use the knob or arrow keys for channel selection.

exit TV picture and sound, press any of the following: WINDOWS (ON),

or any

To exit this mode press Prev Menu

N O T E

Option 107 is required to access TV receiver mode.

2-63

Summary of Contents for 8591C






















































































































































































































































































































































































Search results

Summary of Contents for 8591C

Reviews:

HP 8591C, User Manual, Page: 106 / 373

Search results

Summary of Contents for 8591C

Reviews: