HP 8360, User Handbook Manual

Page: 9 / 508

Regulatory
Information
This product has been designed and tested in accordance with IEC
Publication 1010, Safety Requirements for Electronic Measuring
Apparatus, and has been supplied in a safe condition. The
instruction documentation contains information and warnings
which must be followed by the user to ensure safe operation and to
maintain the instrument in a safe condition.
Manufacturer’s
Declaration
Note This is to certify that this product meets the radio frequency
interference requirements of Directive FTZ The German
Bundespost has been notified that this equipment was put into
circulation and has been granted the right to check the product type
for compliance with these requirements.
Note: If test and measurement equipment is operated with
unshielded cables and/or used for measurements on open set-ups, the
user must insure that under these operating conditions, the radio
frequency interference limits are met at the border of his premises.
Model HP 8360 Series Synthesized Sweepers
Note Hiermit wird bescheinigt, dass dieses in
mit den Bestimmungen von
ist .
Der Deutschen Bundespost wurde das Inverkehrbringen dieses
angezeight und die Berechtigung
der Serie auf Einhaltung der Bestimmungen
Zustzinformation Mess-und Testgerate:
Werden Mess- und Testgerate mit ungeschirmten Kabeln
in offenen Messaufbauten verwendet, so ist vom Betreiber
sicherzustellen, dass die Funk-Entstorbestimmungen unter
Betriebsbedingungen an seiner Grundstiicksgrenze eingehalten
werden.
ix