See Also
(CENTER),
FREQUENCY (MENU),
“CW Operation Start/Stop Frequency Sweep,” in Chapter 1.
“Programming Typical Measurements,” in Chapter 1.
SWEEP
Function Group
SWEEP
Menu Map
Description
This
accesses the sweep menu softkeys.
Manual Sweep
Activates manual sweep mode.
Depending on what parameter is
sweeping, frequency and/or power
can be changed manually with the
rotary knob or the arrow keys.
Start Sweep Trigger Auto
Start Sweep Trigger Bus
Start Sweep Trigger Ext
Sweep Mode List
Sweep Mode Ramp
Sweep Mode Step
Auto
Delay
Automatically triggers a sweep
when (SINGLE) or
is pressed.
Waits for an HP-IB trigger to
trigger a sweep when
or
is pressed.
Waits for an external hardware
trigger to trigger a sweep when
or
is pressed.
Activates the list frequency sweep
mode.
Activates the analog frequency
sweep mode.
Activates the stepped frequency
sweep mode.
Sets the sweep time to a minimum
value for a given span.
Sets the time delay after phase-lock
and before a trigger pulse is sent
from the ANALYZER INTERFACE
BNC. A source settled SRQ is
generated.
Operating and Programming Reference
HP 8360
Handbook
Summary of Contents for 8360
