HP 81104A, Quick Start Manual

Page: 68 / 116

70 Getting Started HP 81110/04A Quick Start
Getting Started
Introduction
Introduction
The intention of this chapter is to give the necessary steps to set up
generic signals for first time users of the HP 81110A or HP 81104A.
Additionally, advanced signals are also described step by step to enable
even experienced users to set up signals more quickly.
When using this product for the first time it is recommended to read
Chapter 2, Introduction to get familiar with the user Interface concept
and the fundamentals of pulse parameters, for User Interface Concept
description see page 37 .
Manual Example Signals
Generic Signals
1 How to set up a Clock Signal (see page 72 )
2 How to set up a Pulse Signal (see page 79 )
3 How to set up a Serial Data Stream Signal (see page 86 )
Advanced Signals
4 How to set up an Edge-displacement Signal (see page 91 )
5 How to set up a Dual Clock Signal (see page 97 )
6 How to set up Burst Signals (see page 103 )
Programming Examples
At the end of each manual example signal, the required set of device
commands are listed. For further information of the commands and a
complete command reference see Chapter 2 of the Reference Guide, p/n
81110-91011.