HP 81104A, Quick Start Manual

Page: 69 / 116

HP 81110/04A Quick Start Getting Started 71
Getting Started
Introduction
Documentation Conventions:
|TIMING|
Press the
|TIMING|
softkey to access the
TIMING parameter screen.
Entry Focus The highlight field, can be moved with the
cursor keys, to either change a mode or
parameter.
24 ns Enter this value and unit with the DATA
ENTRY keys
Freq
Select the mode or parameter name with
the knob.
Keys to press in the DATA ENTRY area
on the front panel.
MODIFY \
CURSOR > Use the front panel controls.
DATA ENTRY /
:VOLTage:HIGH 3V Full command for pattern, 3V high level.
The upper case letters represent the short
form of the command, which results in
faster programming times.
*RST Common IEE 488 command, to reset
instrument to default status
:DISPlay OFF Switch off the automatic update of the
display, when instrument is used in remote
control operations. This increases the
programming speed.