HP 81104A, Quick Start Manual

Page: 44 / 116

46 Introduction HP 81110/04A Quick Start
Introduction
Screens Overview
The instrument can set thresholds and the input impedance for an exter-
nal trigger signal or external high-stability clock input. For the trigger
output, available in pulse mode and the strobe output, available in burst
and pattern mode, it is possible to select between TTL or ECL output
levels. For how to set thresholds or trigger levels refer to “Thresholds
and Trigger-Levels” on page 59.
The instrument allows to read and store instrument settings from and to
a memory card. The reading and storing is done in the
|MEMCARD|
menu, refer to “Reading/Storing on Memory Card” on
page 60.