HP 7475a, Operation And Interconnection Manual

Page: 45 / 101

NOTE:
If necessary, snap the spacer off the shaft, slide the pinch
wheel to the proper position, and snap the spacer back onto the
shaft.
•
Pinch Wheel Position for A and
B
Size Paper
Pinch Wheel Position for A4 and A3 Size Paper
3.
Move the paper loading lever to the
PAPER LOAD
I
position. This
raises the pinch wheels. It also stores and caps the pen to avoid
getting ink on the new paper.
4. Lay a sheet of paper on the platen surface so the paper is aligned
with the paper guide (the white line at the left rear of the platen)
and the left edge of the platen.
A
and
A4
size paper are loaded with
the long side horizontel. B and A3 size paper are loaded with the
long side vertical. Refer to the following illustration.
5. Move the paper loading lever to the
PAPER HOLD
I
position. This
lowers the pinch wheels to
secure
the paper and allow it
free
movement.
PLO'ITER OPERATION
2-27