HP 64780A, User Manual

Page: 67 / 546

Exiting HP 64700 Interfaces
There are several options available when exiting the HP 64700 interfaces. You can
simply close one of the open interface windows, or you can exit the debug session
by closing all the open windows. When exiting the debug session, you can lock the
emulator so that you can continue later, or you can release the emulation system so
that others may use it. This section describes how to:
•
Close an interface window.
•
Exit a debug/emulation session.
To close an interface window
•
In the interface window you wish to close, choose File
→
Exit
→
Window. Or, in
the emulator/analyzer interface command line, enter the end command with no
options.
All other interface windows remain open, and the emulation session continues,
unless the window closed is the only one open for the emulation session. In that
case, closing the window ends the emulation session, but locks the emulator so that
other users cannot access it.
Chapter 3: Starting and Exiting HP 64700 Interfaces
Exiting HP 64700 Interfaces
47