HP 64780A, User Manual

Page: 438 / 546

Illegal width for symbol display: <width> (Error 1138)
Cause: This error occurs when the value specified for the trace format address field
width is not valid.
Action: Enter your command again, and specify the width of the address field for
symbol display within the range of 4 to 55.
Incompatibile signal out events: <Incompatible Event Name> (Error 1254)
Cause: The terminal interface tgout (trigger output) command may be used to
drive the trig1 and/or trig2 signals to the emulator in response to several different
events. The events are trigger recognition, measurement complete, finding a
specified expression, delay after trigger recognition, and delay before measurement
complete. Some of these events may be ORed together, but a delay specification
may not be ORed with trigger recognition or mesaurement complete events.
Action: Examine your tgout specification and modify it to remove ORing of delay
specifications with trigger recognition or measurement complete events.
Insufficient emulation memory (Error 21)
Cause: You tried to map more emulation memory than is available.
Action: Check your map specification. Do not try to map more emulation memory
than is available in your system. You can install up to 2 Mbytes of memory in your
system. For a detailed explanation that may explain why you got this message,
refer to the message titled, "Request cannot be satisfied with remaining map
resources" in this chapter.
Insufficient emulation memory (Error 21)
Cause: You tried to map more emulation memory than is available.
Action: Check your map specification. Do not try to map more emulation memory
than is available in your system. You can install up to 2 Mbytes of memory in your
system.
Chapter 12: Emulator Error Messages
Illegal width for symbol display: <width> (Error 1138)
418