HP 64780A, User Manual

Page: 485 / 546

For example:
setenv DISPLAY=myhost:0.0
Consult the OpenWindows documentation for an explanation of the DISPLAY
environment variable.
2 Set the HP64000 environment variable.
For example, if you installed the HP 64000 software relative to the root directory,
"/", you would enter
setenv HP64000 /usr/hp64000
If you installed the software relative to a directory other than the root directory, it is
strongly recommended that you use a symbolic link to make the software appear to
be under /usr/hp64000. For example, if you installed the software relative to
directory /users/team, you would enter
ln -s /users/team/usr/hp64000 /usr/hp64000
If you do not wish to establish a symbolic link, you can set the HP64000 variable to
the full path that contains the HP 64000 software; also set the
LD_LIBRARY_PATH variable to the directory containing run-time libraries used
by the HP 64000 products. Again, if you installed relative to /users/team, you
would enter
setenv HP64000 /users/team/usr/hp64000
setenv LD_LIBRARY_PATH ${LD_LIBRARY_PATH}:${HP64000}/lib
3 Set the PATH environment variable to include the usr/hp64000/bin directory by
entering
setenv PATH ${PATH}:${HP64000}/bin
Including usr/hp64000/bin in your PATH relieves you from prefixing HP 64700
executables with the directory path.
Chapter 14: Installation
Installing Sun SPARCsystem Software
465