HP 64780A, User Manual

Page: 322 / 546

Commands
Emulator/analyzer interface commands are summarized in the table below and
described in the following pages.
!UNIX_COMMAND
bbaunload
break
cd (change directory)
3
cmb_execute
<command file>
3
copy configuration_info
copy data
4
copy display
copy error_log
copy event_log
copy global_symbols
copy help
copy local_symbols_in
copy memory
4
copy pod_command
copy registers
1
copy software_breakpoints
copy status
copy trace
cws(change working symbol)
3
display configuration_info
display data
4
display error_log
display event_log
display global_symbols
display local_symbols_in
display memory
4
display pod_command
display registers
1
display simulated_io
2
display software_breakpoints
display status
display trace
end
forward
help
3
load <absolute_file>
load configuration
load emul_mem
load trace
load trace_spec
load user_memory
log_commands
3
modify configuration
modify keyboard_to_simio
2
modify memory
4
modify register
1
modify software_breakpoints
1
name_of_module
3
performance_measurement_end
performance_measurement_init
performance_measurement_run
pod_command
pwd (print working directory)
3
pws (print working symbol)
3
reset
run
set
specify
step
stop_trace
store memory
store trace
store trace_spec
sync_sim_registers
1
trace
wait
3
1
This option is not available in real-time mode.
2
This is only available when simulated I/O is defined.
3
These commands are not displayed on softkeys.
4
This option is not available in real-time mode if addresses are in user memory.
Chapter 11: Emulator/Analyzer Interface Commands
302