HP 64780A, User Manual

Page: 219 / 546

Example
Set the width of the address label column to 30 characters and the width of the
mnemonic column to 50 characters:
set width label 30 mnemonic 50
To select the type of count information in the
trace list
•
Choose Trace
→
Display Options... and in the dialog box, select Count Format
Relative or Absolute, as desired. Then click the OK or Apply pushbutton.
•
To display count information in the trace list relative to the trigger state, enter:
display trace count absolute
•
To display count information in the trace list relative to the previous trace list state,
enter:
display trace count relative
The count information in the trace list is always displayed if it is turned on. To turn
on the trace counting function, enter a command beginning with trace counting on
the command line. Refer to "To count states or time" later in this manual for
details.
When using the 1K analyzer, the trace memory is 512 states deep if counting states
or time is turned on and 1024 states deep if counting is turned off. To disable
counting in the 1K analyzer, use the command trace counting off. When using the
deep analyzer, full memory depth is always available; the depth of the deep
analyzer is not affected by the counting selected. See “To count states or time.”
Chapter 7: Using the Emulation-Bus Analyzer
Displaying the Trace List
199