HP 5900, Command Reference Manual

Page: 46 / 607

33
Table 11 Command output
Field Description
RIB GR state
RIB GR status:
•
Start —GR starts.
•
IGP end —All IGP protocols complete GR.
•
VPN-triggering end —Optimal route selection triggered by VPN routes
completes.
•
VPN-calculation end —Optimal VPN route selection completes.
•
Routing protocol end —All routing protocols complete GR.
•
NSR-calculation unfinished —NSR has not finished optimal route selection.
•
Triggering start —All triggered optimal route selection starts.
•
Triggering end —All triggered optimal route selection completes.
•
Phase1-calculation end —Optimal route selection phase 1 completes.
•
All end —All protocols complete GR.
•
Phase2-calculation end —Optimal route selection phase 1 completes.
RCOM GR state
RCOM GR status:
•
Start —GR starts.
•
VPN-calculation end —Optimal VPN route selection completes.
•
VPN-notification end —VPN routes have been delivered to the route
management module.
•
Routing protocol end —All routing protocols complete GR.
•
NSR-calculation unfinished —NSR has not finished optimal route selection.
•
Phase1-calculation end —Optimal route selection phase 1 completes.
•
Notification end —All routes have been delivered to the route management
module.
•
Phase2-calculation end —Optimal route selection phase 2 completes.
•
Flush start —Starts to flush routes to the FIB.
•
Flush end —Completes flushing routes to the FIB.
No. Protocol number.
Lifetime Lifetime (in seconds) of routes/labels in the RIB during GR.
FD Handle between the protocol and the RIB.
State
Protocol GR state:
•
Init —Initialization state.
•
Listen —Listening state.
•
Idle.
•
Active.
•
Start —GR starts.
•
End —GR completes.
Start/End
Message sending state:
•
No —The message has not been sent.
•
Yes —The message has been sent.