72
rip
Use
rip
to enable RIP and enter RIP view.
Use
undo rip
to disable RIP.
Syntax
rip
[
process-id
] [
vpn-instance
vpn-instance-name
]
undo rip
[
process-id
]
Default
RIP is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
process-id
: Specifies a RIP process by its ID in the range of 1 to 65535. The default is 1.
vpn-instance
vpn-instance-name
: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If no VPN is specified, the RIP process runs on the public network.
Usage guidelines
You must enable a RIP process before configuring global parameters for it. This restriction does not apply
to configuring interface parameters.
If you disable a RIP process, the configured interface parameters become invalid.
Examples
# Enable RIP process 1 and enter RIP view.
<Sysname> system-view
[Sysname] rip
[Sysname-rip-1]
rip authentication-mode
Use
rip authentication-mode
to configure RIPv2 authentication.
Use
undo rip authentication-mode
to cancel RIPv2 authentication.
Syntax
rip authentication-mode
{
md5
{
rfc2082
{
cipher
cipher-string
|
plain
plain-string
}
key-id
|
rfc2453
{
cipher
cipher-string
|
plain
plain-string
} } |
simple
{
cipher
cipher-string
|
plain
plain-string
}
}
undo rip authentication-mode
Default
RIPv2 authentication is not configured.
Views
Interface view
