57
display rip database
Use
display rip
database
to display active routes for a RIP process. RIP advertises active routes in RIP
routing updates.
Syntax
display rip
process-id
database
[
ip-address
{
mask-length
|
mask
} ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
: Specifies a RIP process by its ID in the range of 1 to 65535.
ip-address
{
mask-length
|
mask
}: Displays active routes for the specified IP address. Without this
argument, the command displays all actives routes for a RIP process.
Examples
# Display active routes for RIP process 100.
<Sysname> display rip 100 database
1.0.0.0/8, auto-summary
1.1.1.0/24, cost 16, interface summary
1.1.1.0/24, cost 0, nexthop 1.1.1.1, RIP-interface
1.1.2.0/24, cost 0, imported
2.0.0.0/8, auto-summary
2.0.0.0/8, cost 1, nexthop 1.1.1.2
# Display active routes with destination IP address 1.1.1.0 and mask length 24 for RIP process 100.
<Sysname> display rip 100 database 1.1.1.0 24
1.1.1.0/24, cost 16, interface summary
1.1.1.0/24, cost 0, nexthop 1.1.1.1, RIP-interface
Table 20
Command output
Field Description
cost
Cost of the route.
auto-summary
Indicates that the route is a RIP automatic summary route.
interface summary
Indicates that the route is a RIP interface summary route.
nexthop
Address of the next hop.
RIP-interface
Direct route on a RIP-enabled interface.
imported
Indicates that the route is redistributed from another routing protocol.
display rip interface
Use
display rip interface
to display RIP interface information for a RIP process.
