484
Default
No IPsec profile is applied to an area.
Views
OSPFv3 area view
Predefined user roles
network-admin
Parameters
profile-name
: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63 characters.
Usage guidelines
To protect routing information and prevent attacks, OSPFv3 can authenticate protocol packets by using
an IPsec profile. For more information about IPsec profiles, see
Security Configuration Guide
.
Examples
# Apply IPsec profile
profile001
to area 0 in OSPFv3 process 1.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 0
[Sysname-ospfv3-1-area-0.0.0.0] enable ipsec-profile profile001
filter (OSPFv3 area view)
Use
filter
to configure inbound/outbound Inter-Area-Prefix-LSA filtering on an ABR.
Use
undo filter
to remove the configuration.
Syntax
filter
{
acl6-number
|
prefix-list
prefix-list-name
|
route-policy
route-policy-name
} {
export
|
import
}
undo
filter
{
export
|
import
}
Default
Inter-Area-Prefix-LSAs are not filtered.
Views
OSPFv3 area view
Predefined user roles
network-admin
Parameters
acl6-number
: Specifies an IPv6 ACL by its number in the range of 2000 to 3999 to filter
inbound/outbound Inter-Area-Prefix-LSAs.
prefix-list-name
: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63 characters, to
filter inbound/outbound Inter-Area-Prefix-LSAs.
route-policy-name
: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters, to
filter inbound/outbound Inter-Area-Prefix-LSAs.
export
: Filters Inter-Area-Prefix-LSAs advertised to other areas.
