HP 5900 Command Reference Manual Download Page 225

Page: 225 / 607

212

Field Description

NextHop

Primary next hop of the node or the link advertising source.

Interface

Primary output interface of the node or the link advertising source.

BkNextHop

Backup next hop.

BkInterface

Backup output interface.

Neighbor

ID of the primary next hop neighbor.

BkNeighbor

ID of the backup next hop neighbor.

SpfLink Topology

link.

SpfLinkCnt

Number of topology links.

LinkCost Link

cost.

LinkNewCost

New link cost.

LinkFlag

Link flag:

•

—The link is isolated.

•

—The link is to be deleted.

•

—The neighbor is a child node.

•

—The neighbor is the parent node.

•

—The link is involved.

•

—The link is a new path.

•

—The link is on the change list.

•

—The protocol usage of the link is changed.

•

—The next hop of the link is changed.

LinkSrcCnt

Number of link advertising sources.

Type

Type of the link advertising source:

•

Adjacent

—The link advertising source is a local neighbor.

•

Remote

—The link advertising source is advertised by a remote node in an

LSP.

Cost

Cost of the link advertising source.

display isis statistics

Use

display isis statistics

to display IS-IS statistics.

Syntax

display isis statistics

[

level-1

level-1-2

level-2

] [

process-id

]

Views

Any view

Predefined user roles

network-admin
network-operator

Summary of Contents for 5900
































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 5900

Reviews:

Related manuals for 5900

Brands by name

Popular brands

HP 5900, Command Reference Manual

Search results

Summary of Contents for 5900

Reviews:

Related manuals for 5900

Brands by name

Popular brands