179
Parameters
default-route-advertise-always
: Used only on a stub ABR. With this keyword, the ABR advertises a
default route in a Type-3 LSA into the stub area regardless of whether
FULL
-state neighbors exist in the
backbone area. Without this keyword, the ABR advertises a default route in a Type-3 LSA into the stub
area only when at least one
FULL
-state neighbor exists in the backbone area.
no-summary
: Used only on a stub ABR. With this keyword, the ABR advertises only a default route in a
Type-3 LSA into the stub area without advertising any other Type-3 LSA. The area is a totally stub area.
Usage guidelines
To remove the
default-route-advertise-always
or
stub no-summary
configuration on the ABR, execute the
stub
command again to overwrite it.
To configure an area as a stub area, issue the
stub
command on all routers attached to the area.
Examples
# Configure Area 1 as a stub area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] stub
Related commands
default-cost
(OSPF area view)
stub-router
Use
stub-router
to configure a router as a stub router.
Use
undo
stub-router
to restore the default.
Syntax
stub-router
[
external-lsa
[
max-metric-value
] |
include-stub
|
on-startup
{
seconds
|
wait-for-bgp
[
seconds
] } |
summary-lsa
[
max-metric-value
] ] *
undo stub-router
Default
No router is a stub router.
Views
OSPF view
Predefined user roles
network-admin
Parameters
external-lsa
max-metric-value
: Specifies a cost for the external LSAs, in the range of 1 to 16777215. The
default is 16711680.
include-stub
: Sets the cost of the stub links (link type 3) in Router LSAs to the maximum value 65535.
on-startup
seconds
: Specifies the router as a stub router during reboot, and specifies the timeout time in
the range of 5 to 86400 seconds.
