79
Use
undo rip metricout
to restore the default.
Syntax
rip metricout
[
route-policy
route-policy-name
]
value
undo rip metricout
Default
The additional metric for outbound routes is 1.
Views
Interface view
Predefined user roles
network-admin
Parameters
route-policy
route-policy-name
: Uses the specified routing policy to add an additional metric for the
routes matching it. The
route-policy-name
argument is a case-sensitive string of 1 to 63 characters.
value
: Adds an additional metric to outbound routes, in the range of 1 to 16.
Usage guidelines
With the command configured on an interface, the metric of RIP routes sent on the interface will be
increased.
If a routing policy is referenced with the
route-policy
keyword, the following operations can be
performed:
•
Routes matching the policy is added with the metric specified in the
apply cost
command
configured in the policy. Routes not matching it are added with the metric specified in the
rip
metricout
command. The
rip metricout
command does not support the
+
or
–
keyword—used to
add or reduce a metric—specified in the
apply cost
command.
•
If the
apply cost
command is not configured in the policy, all the outbound routes are added with
the metric specified in the
rip metricout
command.
Examples
# Configure VLAN-interface 10 to add a metric of 6 to the outbound route 1.0.0.0/8 and to add a metric
of 2 to other outbound routes.
<Sysname> system-view
[Sysname] ip prefix-list 123 permit 1.0.0.0 8
[Sysname] route-policy abc permit node 0
[Sysname-route-policy-abc-10] if-match ip address prefix-list 123
[Sysname-route-policy-abc-10] apply cost 6
[Sysname-route-policy-abc-10] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip metricout route-policy abc 2
Related commands
apply cost
rip mib-binding
Use
rip mib-binding
to bind a RIP process to MIB operation.
