451
Field Description
Reset phase of module
Reset phase of each module:
•
LSDB synchronization (S) module:
{
N/A
—Not reset.
{
Delete ASE
—Delete all ASE LSAs.
{
Delete area LSA
—Delete LSAs from an area.
{
Delete area IF
—Delete interfaces from an area.
•
Route calculation (C) module:
{
N/A
—Not reset.
{
Delete topology
—Delete area topology.
{
Delete router
—Delete routes of routers.
{
Delete intra AS
—Delete intra-AS routes
{
Delete inter AS
—Delete AS-external routes.
{
Delete ASBR
—Delete ASBR routes.
•
Route redistribution (R) module:
{
N/A
—Not reset.
{
Delete import
—Delete redistributed routes.
IPsec profile name
IPsec profile applied to the interface.
Created by Vlink
The area is created through virtual link.
7/5 translator state
State of the translator that translates Type-7 LSAs to
Type-5 LSAs:
•
Enabled
—The translator is specified through
commands.
•
Elected
—The translator is designated through
election.
•
Disabled
—The device is not a translator.
7/5 translate stability timer interval
Stability interval (in seconds) for Type-7 LSA-to-Type-5
LSA translation.
display ospfv3 abr-asbr
Use
display ospfv3 abr-asbr
to display information about the routes to OSPFv3 ABR and ASBR.
Syntax
display ospfv3
[
process-id
]
abr-asbr
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id
: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command displays information about all the routes to the OSPFv3 ABR and ASBR.
