
To make the dummy load
You can build the dummy load for the power supply, or purchase it from
Hewlett-Packard using HP P/N 54600-66504. HP 54600-66504 consists of a
cable, HP P/N 8120-1506, and a test connector, HP P/N 1251-6981.
1
Obtain a connector compatible with the connector on the LVPS.
2
Connect the following load resistors to the connector.
•
+
5.1 V requires a 3 A load, 1.7
Ω
and 15 W on pin 15, 17, or 19.
•
+
15.75 V requires a 1.3 A load, 12.2
Ω
and 20.5 W on pin 11 or 13.
•
With the fan operating,
−
15.75 V requires a 0.6 A load, 26.25
Ω
and 9.5 W
on pin 5 or 7.
•
Without the fan operating,
−
15.75 V requires a 0.8 A load, 26.25
Ω
and
13 W on pin 5 or 7.
3
Connect the other end of the resistors to ground pins 2, 4, 6, and 8.
Testing, Adjusting, and Troubleshooting the Analyzer
To make the dummy load
158
Summary of Contents for 54620A
