HP 53131A, Operating Manual

Page: 9 / 196

Contents
Operating Guide vii
Example Procedure for Turning Off Math Mode 2-30
Example Procedure for Setting the Offset From
the Last Measurement Value
2-31
Overview of Statistics (Stats) Menu 2-32
To Use the Stats Menu for Automatic and Continuous
Statistical Analysis
2-33
Example Procedure for Computing Stats 2-33
Example Procedure for Easy Viewing of Stats 2-34
Example Procedure for Filtering Data (Using Limits)
During Stats
2-35
Example Procedure for Configuring SINGLE to Initiate
N Measurements
2-36
Example Procedure for Turning Off Stats Mode 2-36
Using the LIMITS Menu Keys 2-37
Overview of Limits Menus 2-37
To Set and Use Automatic Limit Testing 2-38
Limits Testing Example 1—Flag and Stop Measuring
On Limits
2-38
Limits Testing Example 2—Flag On Limits but
Continue Measuring
2-40
Limits Testing Example 3—Use Analog Graph
Display While Adjusting Input Signal
2-40
Limits Testing Example 4—Selecting Filtering
Conditions of Stats Computation
2-42
Limits Testing Example 5—Sending the Limit-Detect
Output to the RS-232 Serial Port
2-43
Using CHANNEL 1 and CHANNEL 2 Input
Conditioning Keys
2-44
Overview of Trigger/Sensitivity Menu 2-44
To Use the Trigger/Sensitivity Keys to Adjust Counter’s
Triggering Level
2-48
Example Procedure for Setting Trigger Voltage and
Sensitivity Levels
2-48