HP 2605dtn - Color LaserJet Laser Printer, Reference

Page: 304 / 372

●
Trailing Edge Over-development (half-speed) . The On setting selects optimized EP process
parameters for decreasing trailing edge over-development in half speed (heavy and glossy media
types). Trailing edge over-development is a jump-gap developer defect which causes excess toner
at trailing edges of halftoned or solid areas.
● Mottle Prevention . The On setting selects optimized EP process parameters for decreasing
developer mottle. This problem has largely been eliminated by cartridge and toner design changes.
System Setup
Use the System Setup screen to change the system defaults for your HP Color LaserJet 2605 series
printer.
Figure 7-28 System Setup screen
The following Jam recovery settings are available:
●
Auto (default)
● On
●
Off
The following Auto continue settings are available:
●
On
● Off (default)
You can set the Connection time-out (I/O) setting to any value from 5 to 7200 seconds.
280 Chapter 7 The HP ToolboxFX ENWW
T
h
e HP To
olbo
xFX