HP 2605dtn - Color LaserJet Laser Printer, Reference

Page: 170 / 372

Each option for the Use Different Paper/Covers setting is described in the following sections, in the
order they appear in the pane below the Use Different Paper/Covers check box.
Front Cover and Back Cover options
Use these options to include a blank or preprinted front cover or back cover on a document.
The following figure shows the Front Cover setting and options. These options are the same for the
Back Cover setting.
Figure 5-7 Front Cover setting
The Front Cover and Back Cover options are as follows:
●
Add a Blank or Preprinted Cover check box
●
Source is: drop-down menu
●
Type is: drop-down menu
When you select Front Cover or Back Cover , you must also select the Add a Blank or Preprinted
Cover check box to enable the setting. When you select this check box, the Source is: and Type is:
drop-down menus become available and a check mark appears next to the Back Cover option.
NOTE The Back Cover options are not available when the Booklet Layout setting is enabled
on the Finishing tab. For two-page-per-sheet (2-up) booklet printing, you can obtain a cover by
selecting different media for the first page only. The back cover setting is unavailable, because
this page would otherwise be printed in the middle of a booklet.
The Source is: setting specifies the source tray to use for adding a back cover to the document. The
list of source trays depends on the printer accessories. Any optional media trays that are installed
through the
Configure tab also appear here. For more information about the Source is: setting, see
the Source Is: drop-down menu section of this chapter.
146 Chapter 5 Windows HP PCL 6 Unidriver features ENWW
Win
dows HP PCL
6
Unidriver featu
res