HP 2605dtn - Color LaserJet Laser Printer, Reference

Page: 249 / 372

menu controls the selection of a device-dependent color table that is embedded in the printer firmware.
The options are Black Only or 4-Color.
●
Black Only . This option generates neutral colors (grays and blacks) by using only black toner which
ensures that neutral colors do not have a color cast.
●
4-Color . This option generates neutral colors by combining all four colors of toner, which produces
smoother gradients and transitions to non-neutral colors. It also produces the darkest possible
black.
The Halftone setting controls the selection of a device-dependent halftone algorithm that is embedded
in the printer firmware. The Halftone options, Smooth and Detail , affect the resolution and clarity of
your color output. You cannot independently adjust halftone settings for text, graphics, and photos. For
example, if you select the
Smooth setting for Text , you also set Photos and Graphics to Smooth .
●
Smooth. This option provides better results for large, solid-filled print areas. It also enhances
photographs by smoothing out fine color gradations. Select this option for uniform and smooth area
fills.
●
Cyan – 155 lines per inch (lpi)
●
Magenta – 155 lpi
● Yellow – 212 lpi
●
Black – 155 lpi
●
Detail. This option is useful for text and graphics that require sharp distinctions among lines or
colors, or for images that contain a pattern or high level of detail. Select this option for sharp edges
and detail.
●
Cyan – 190 lpi
● Magenta – 190 lpi
●
Yellow – 200 lpi
●
Black – 212 lpi
The Color Options settings are Edge Control and RGB Color . Edge Control , which determines how
edges are rendered, consists of two components: adaptive halftoning and trapping. Adaptive halftoning
increases the edge sharpness of text and graphics while maintaining the quality of area fills. Trapping
reduces the effect of color-plane misregistration by slightly overlapping the edges of adjacent objects.
The following options are available:
●
Off , which sets Trapping and Adaptive Halftoning to Off .
●
Light , which provides minimal trapping. Adaptive Halftoning is set to On .
●
Normal , which provides the default Trapping setting. Adaptive Halftoning is set to On .
●
Maximum , which provides the most trapping. Adaptive Halftoning is set to On .
ENWW HP Traditional PCL 6 Driver features (for Windows 98 SE and Windows Me) 225
Wi
ndow
s H
P
Tra
d
it
ion
al
PCL 6 Driver features