HP 245 G4 Maintenance And Service Manual Download Page 17

Page: 17 / 124

Component

Description

WARNING!

To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset.
For additional safety information, refer to the Regulatory,
Safety, and Environmental Notices.

To access this document:

Windows 8.1:

From the Start screen, type

support

, and then select the HP

Support Assistant app.

‒

or –

From the Windows desktop, click the question mark icon in the
notification area, at the far right of the taskbar.

Windows 10:

Select Start, select All apps, select HP Help and Support, and
then select HP Documentation.

NOTE:

When a device is connected to the jack, the computer

speakers are disabled.

NOTE:

Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and audio-
in (microphone).

Left side

Summary of Contents for 245 G4





























































































































Search results

Summary of Contents for 245 G4

Reviews:

Related manuals for 245 G4

Brands by name

Popular brands

HP 245 G4, Maintenance And Service Manual

Search results

Summary of Contents for 245 G4

Reviews:

Related manuals for 245 G4

Brands by name

Popular brands