manualshive.com logo in svg

HP 245 G4, Maintenance And Service Manual

Share
Download
HP 245 G4 Maintenance And Service Manual Download Page 41

6

Removal and replacement procedures for 
Authorized Service Provider parts

CAUTION:

Components described in this chapter should only be accessed by an authorized service provider. 

Accessing these parts can damage the computer or void the warranty.

NOTE:

HP continually improves and changes product parts. For complete and current information on 

supported parts for your computer, go to 

http://partsurfer.hp.com

, select your country or region, and then 

follow the on-screen instructions.

Component replacement procedures

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty, 

are on the service tag at the bottom of your computer. See 

Labels on page 15

 for details.

This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

There are as many as 56 screws that must be removed, replaced, or loosened when servicing Authorized 
Service Provider only parts. Make special note of each screw size and location during removal and 
replacement.

Component replacement procedures

33

Summary of Contents for 245 G4





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands