manualshive.com logo in svg

HP 245 G4, Maintenance And Service Manual

Share
Download
HP 245 G4 Maintenance And Service Manual Download Page 53

USB board

Description

Spare part number

USB board (includes cable)

813515-001

Before removing the USB board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 30

).

5.

Remove the optical drive (see 

Optical drive on page 31

), if installed.

6.

Remove the bottom cover (see 

Bottom cover on page 34

).

To remove the USB board:

1.

Disconnect the USB board cable from the system board (1).

2.

Remove the Phillips PM2.5×3.0 screw (2) that secures the USB board to the computer.

3.

Lift the USB board (3) from the computer.

4.

Lift the cable to disengage the adhesive that secures it to the computer (4).

Reverse this procedure to install the USB board.

Component replacement procedures

45

Summary of Contents for 245 G4





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands