manualshive.com logo in svg

HP 245 G4, Maintenance And Service Manual

Share
Download
HP 245 G4 Maintenance And Service Manual Download Page 83

4.

Double-click the file that has an .exe extension (for example, filename.exe).

The BIOS installation begins.

5.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the downloaded file

 

from your hard drive.

Synchronizing a tablet and keyboard (select products only)

For a tablet with a detachable keyboard, when you attach the tablet to the keyboard and restart the 
computer, Setup Utility (BIOS) checks to see if the Embedded Controller firmware on the keyboard needs to be 
synchronized. If so, synchronization begins. If the synchronization is interrupted, a notification screen 
displays for 10 seconds before the tablet restarts and attempts to synchronize again.

NOTE:

The Embedded Controller firmware will synchronize ONLY if the tablet or keyboard battery is more 

than 50% charged, or if your tablet is connected to AC power.

Synchronizing a tablet and keyboard (select products only)

75

Summary of Contents for 245 G4





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands