manualshive.com logo in svg

HP 245 G4, Maintenance And Service Manual

Share
Download
HP 245 G4 Maintenance And Service Manual Download Page 10

Category

Description

●

2048-MB total system memory (2048×1)

Supports up to 2 GB max on-board system memory (for models with E1-6010 processors)

DDR3-1333MHz Dual Channel Support (DDR3L-1600MHz bridge to DDR3L-1333MHz)

Hard drives

Supports 6.35-cm (2.5-in) SATA hard drives in 9.5-mm (.37-in) and 7.0-mm (.28-in) thicknesses

Supports the following hard drives:

●

1-TB, 5400-rpm, 9.5-mm

●

750-GB, 5400-rpm, 9.5-mm

●

500-GB, 5400-rpm, 7.0-mm or 9.5-mm

eMMC

32 GB

Optical drive

Fixed, serial ATA, 9.5-mm tray load

DVD+/-RW Double-Layer SuperMulti

Supports zero power optical drive

Supports M-disc

Supports configuration without optical drive

Webcam/microphone HP TrueVision HD: HD camera - Fixed (no tilt) + activity LED, USB 2.0, M-JPEG, 1280 x 720 by 30 frames per 

second

HP Webcam– 640 x 480 by 24 frames per second

Single digital microphone

HP Noise Cancellation enabled

Audio

DTS Studio Sound

Dual speakers

Ethernet

Integrated 10/100 network interface card (NIC)

Sensor

TPM (Trusted Platform Module) 2.0

Wireless

Integrated wireless options with single antenna (M.2):

Compatible with Miracast-certified devices

Support for the following WLAN formats:

●

Realtek RTL8188EE 802.11bgn 1x1 Wi-Fi Adapter

●

Realtek RT8723BE 802.11bgn 1x1 Wi-Fi + BT4.0 Combo Adapter

External media card

HP Multi-Format Digital Media Reader

Support SD/SDHC/SDXC

Push-Pull Insertion/Removal

Internal Card

One M.2 slot for WLAN

Ports

HDMI version 1.4 supporting 1920 ×1200 @ 60Hz

VGA (Dsub 15 pin) supporting 1920 × 1200 external resolution @ 60Hz

Hot Plug/unplug and auto detect for correct output to wide-aspect vs. standard aspect video

RJ-45 (Ethernet, includes link and activity lights)

USB 3.0 (1 port; left side)

2

Chapter 1   Product description

Summary of Contents for 245 G4





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands