manualshive.com logo in svg

HP 245 G4, Maintenance And Service Manual

Share
Download
HP 245 G4 Maintenance And Service Manual Download Page 117

Country/region

Accredited agency

Applicable note number

3.

The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese 
Dentori Law. The flexible cord must be Type VCTF, 3-conductor, 0.75mm

2

 or 1.25mm

2

 conductor size. The wall plug must be a 

two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) configuration.

4.

The flexible cord must be Type RVV, 3-conductor, 0.75mm

2

 conductor size. Power cord set fittings (appliance coupler and wall 

plug) must bear the CCC certification mark.

5.

The flexible cord must be Type H05VV-F 3X0.75mm

2

 conductor size. KTL logo and individual approval number must be on each 

element. Corset approval number and logo must be printed on a flag label.

6.

The flexible cord must be Type HVCTF 3X1.25mm

2

 conductor size. Power cord set fittings (appliance coupler, cable, and wall plug) 

must bear the BSMI certification mark.

7.

For 127 V ac, the flexible cord must be Type SVT or SJT 3 x 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL and CSA or C-
UL marks. For 240 V ac, the flexible cord must be Type H05VV-F 3X0.75/1.00mm

2

 conductor size, with plug BS 1363/A with BSI or 

ASTA marks.

Requirements for specific countries and regions 109

Summary of Contents for 245 G4





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands