manualshive.com logo in svg

HP 245 G4, Maintenance And Service Manual

Share
Download
HP 245 G4 Maintenance And Service Manual Download Page 39

Optical drive

NOTE:

Optical drive spare part kits include bracket and bezel.

Description

Spare part number

DVD+/-RW Double-Layer SuperMulti Drive for use in HP Notebook models (includes bracket and bezel)

813514-001

DVD+/-RW Double-Layer SuperMulti Drive for use in HP 245 G4 Notebook models (includes bracket and 
bezel)

818147-001

Before removing the optical drive, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 30

).

To remove the optical drive:

1.

Remove the Phillips PM2.5×6.0 screw (1) that secures the optical drive to the computer.

2.

Remove the optical drive (2) by sliding it out of the optical drive bay.

Reverse this procedure to reassemble and install the optical drive.

Component replacement procedures

31

Summary of Contents for 245 G4





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands