manualshive.com logo in svg

HP 15-ew0 Series, Maintenance And Service Manual, Page: 99 / 100

Share
Download
HP 15-ew0 Series Maintenance And Service Manual Download Page 99

pointing device 3

ports 2

power requirements 3

processors 1

product name 1

security 3

sensors 3

serviceability 3

storage 2

video 2

wireless 2

product name 1

R

rear components 13

recovery 68, 69

discs 69

media 69

USB flash drive 69

recovery media 68

creating using HP Cloud Recovery 

Download Tool 68

creating using Windows tools 68

Remote HP PC Hardware Diagnostics 

UEFI settings

customizing 75

using 75

removal and replacement

procedures 34

removing personal data from volatile 

system memory 80

restoring 68

restoring and recovery methods 69

right side components 4

S

Screw Kit, spare part number 24

security, product description 3

sensors, product description 3

serviceability, product description 3

setup utility

navigating and selecting 64

restoring factory settings 65

slots

memory card reader 7

microSD memory card reader 7

software, locating 4

solid-state drive

illustrated 19

removal 37

spare part numbers 19, 22, 37

specifications 78, 79

solid-state drive bottom shield

spare part number 19, 23, 37

Solid-State Drive Thermal Pad Kit

spare part number 19, 23

solid-state drive top shield

illustrated 19, 23

removal 37

spare part country codes 62

speaker

removal 59

spare part number 59

speakers 13

illustrated 20

spare part number 20

special keys

identifying 11

using 11

specifications

computer 77

display 77, 78

hard drive 77

solid-state drive 78, 79

static electricity 25-27

storage

product description 2

support information 32

Sure Start

using 67

system board

illustrated 20

removal 56

spare part numbers 20, 56

system fan

removal 43

spare part number 43

system memory, removing personal 

data from volatile 80

system restore 69

system restore point, creating 68

T

top cover/keyboard

illustrated 17, 18

spare part numbers 17, 18, 62

touchpad

illustrated 19

removal 61

settings 9

spare part numbers 19, 61

touchpad bracket

removal 62

touchpad buttons

identifying 10

touchpad cable

illustrated 19

removal 60

spare part number 19, 60

touchpad settings, adjusting 9

touchpad zone, identifying 10

TPM settings 67

transporting guidelines 25, 31

U

USB SuperSpeed port with HP Sleep 

and Charge, identifying 5

USB SuperSpeed port, identifying 6

USB Type-C power connector and 

SuperSpeed port with HP Sleep 

and Charge and DisplayPort 

output, identifying 6

USB Type-C power connector and 

Thunderbolt port with HP Sleep 

and Charge and DisplayPort 

output, identifying 5

V

vents, identifying 13, 14

video, product description 2

W

wake-on-tough 7

webcam/microphone module

illustrated 22

removal 51

spare part number 22, 52

webcam/microphone module cable

illustrated 22

spare part number 22, 52

webcam/microphone module thermal 

pad

spare part number 22

Windows

backup 68

recovery media 68

system restore point 68

Windows key, identifying 12

Windows tools, using 68

wireless antenna

illustrated 22

location 8

removal 53

spare part numbers 22, 54

wireless, product description 2

WLAN antenna

illustrated 22

location 8

spare part numbers 22

WLAN module

illustrated 19

Index 93

Summary of Contents for 15-ew0 Series





































































































Reviews:

No comments