manualshive.com logo in svg

HP 15-ew0 Series, Maintenance And Service Manual, Page: 92 / 100

Share
Download
HP 15-ew0 Series Maintenance And Service Manual Download Page 92

c. At the Secure Boot Configuration window, select Secure Boot, select Clear Secure Boot Keys, and then 

follow the on-screen instructions to continue.

Using HP Sure Start (select products only)

Select computer models are configured with HP Sure Start, a technology that continuously monitors your 

computer's BIOS for attacks or corruption.

If the BIOS becomes corrupted or is attacked, HP Sure Start restores the BIOS to its previously safe state, without 

user intervention. Those select computer models ship with HP Sure Start configured and enabled. HP Sure Start 

is configured and already enabled so that most users can use the HP Sure Start default configuration. Advanced 

users can customize the default configuration.

To access the latest documentation on HP Sure Start, go to 

http://www.hp.com/support

.

86

Chapter 10  Statement of memory volatility

Summary of Contents for 15-ew0 Series





































































































Reviews:

No comments