HP 15-ew0 Series, Maintenance And Service Manual, Page: 43 / 100

3. Remove the battery (3).
To insert the battery, reverse the removal procedures.
Solid-state drive
To remove the M.2 solid-state drive, use this procedure and illustration.
Table 5-3 Solid-state drive descriptions and part numbers
Description Spare part number
1 TB, M.2 2280, PCIe, NVMe-3×4, SS solid-state drive with TLC M16560-005
1 TB, M.2 2280, PCIe, NVMe, value solid-state drive M85370-005
512 GB, M.2 2280, PCIe, NVMe-3×4, SS solid-state drive with TLC M17436-005
512 GB, M.2 2280, PCIe, NVMe, value solid-state drive M85364-005
256 GB, M.2 2280, PCIe-4×4, ZTurbo solid-state drive with TLC M52025-005
256 GB, M.2 2280, PCIe, NVMe, value solid-state drive M85354-005
Solid-state drive top shield: The solid-state drive top shield is not available as a spare part component.
Solid-state drive bottom shield N09637-001
Solid-State Drive Thermal Pad Kit N09636-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 34 ).
2. Remove the bottom cover (see Bottom cover on page 34 ).
3. Disconnect the battery cable from the system board (see Battery on page 36 ).
Remove the solid-state drive:
1. Remove the two Phillips M2.0 × 3.4 screws (1) that secure the solid-state drive top shield to the computer.
Solid-state drive 37