manualshive.com logo in svg

HP 15-ew0 Series, Maintenance And Service Manual, Page: 16 / 100

Share
Download
HP 15-ew0 Series Maintenance And Service Manual Download Page 16

Table 2-4

Touchpad components and their descriptions

Component

Description

(1)

Touchpad zone

Reads your finger gestures to move the pointer or activate items 

on the screen.

(2)

Left touchpad button

Functions like the left button on an external mouse.

(3)

Near Field Communications (NFC) tapping area 

and antenna (select products only)*

Allows you to wirelessly share information when you tap it with an 

NFC-enabled device.

(4)

Right touchpad button

Functions like the right button on an external mouse.

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the 

antennas free from obstructions.

For wireless regulatory notices, see the section of the 

Regulatory, Safety, and Environmental Notices

 that applies to your country or region.

To access this guide:

▲

Select the Search icon (select products only) in the taskbar, type 

HP Documentation

 in the search box, and then select HP 

Documentation.

Lights

Identify the lights on the computer.

10

Chapter 2  Components

Summary of Contents for 15-ew0 Series





































































































Reviews:

No comments