manualshive.com logo in svg

HP 15-ew0 Series, Maintenance And Service Manual, Page: 8 / 100

Share
Download
HP 15-ew0 Series Maintenance And Service Manual Download Page 8

Table 1-1

Product components and their descriptions (continued)

Category

Description

Storage

Support for the following solid-state drives:

●

1 TB, 2280, Peripheral Component Interconnect Express (PCIe)-4×4, Non-Volatile Memory Express (NVMe) 

solid-state drive with three-layer cell (TLC)

●

1 TB, 2280, PCIe, NVMe value solid-state drive

●

512 GB, 2280, PCIe-4×4, NVMe solid-state drive with TLC

●

512 GB, 2280, PCIe, NVMe, value solid-state drive

●

256 GB, PCIe-4×4, NVMe, Secure Seal (SS) solid-state drive with TLC

●

256 GB, 2280, PCIe, NVMe, value solid-state drive

Audio and video

Audio brand: BANG and OLUFSEN

Support for Alexa

Support for dual speakers

Support for Far Field Cortana

Support for HP Audio Boost 2.0

Support for Speaker Swap

Support for XiaoWei

HP True Vision Camera: integrated, 5 MP, USB 2.0, near field-of-view (NFOV), fixed, infrared (IR), camera with 

sliding shutter

720p by 30 frames per second

Dual-array microphone with appropriate beam-forming, echo-cancellation, noise-suppression-software

Multimedia card reader HP multiformat digital media card reader

Pen

HP (Zenvo) digital pen in nightfall black finish

Wireless

Wireless Local Area Network (WLAN)

Intel AX211 Wi-Fi® 6e + Bluetooth® 5.2 M.2 2230 160 MHz CNVi worldwide (WW) WLAN

Mediatek MT7921 Wi-Fi 6 + Bluetooth 5.2 M.2 2230 PCI-e + USB WW WLAN module

Ports

Hot plug/unplug and autodetect for correct output to wide-aspect vs. standard aspect video

●

Audio-out (headphone)/Audio-in (microphone) combo jack

●

HDMI port

●

Smart card reader

●

USB SuperSpeed 10 Gbps port

●

USB SuperSpeed 10 Gbps port with HP Sleep and Charge

●

USB Type-C® power connector and SuperSpeed 10 Gbps ports with HP Sleep and Charge and DisplayPort 

output (2)

●

USB Type-C power connector and Thunderbolt™ ports with HP Sleep and Charge and DisplayPort™ output 

(2)

2

Chapter 1  Product description

Summary of Contents for 15-ew0 Series





































































































Reviews:

No comments