manualshive.com logo in svg

HP 15-ew0 Series, Maintenance And Service Manual, Page: 62 / 100

Share
Download
HP 15-ew0 Series Maintenance And Service Manual Download Page 62

Reverse this procedure to install the heat sink.

System board

To remove the system board, use these procedures and illustrations.

IMPORTANT:

After replacing the system board, it is necessary to download and run the service tool to update 

the new ambient light sensor (ALS) data to the system BIOS. Please search for the related Service Advisory in 

WISE for details.

Table 5-9

System board descriptions and part numbers

Description

Spare part number

The system board spare part kit includes an integrated processor and replacement thermal material.

Equipped with an Intel Core i7-1260P 1.6 GHz processor (12 cores, 18 MB Intel Smart Cache, 28 W), and the 

Windows 11 operating system

N09662-601

Equipped with an Intel Core i7-1255U 1.7 GHz processor (10 cores, 12 MB Intel Smart Cache, 15 W), 

an RTX2050 graphics controller with 4 GB of discrete graphics subsystem memory, and the Windows 11 

operating system

N09659-601

Equipped with an Intel Core i7-1255U 1.7 GHz processor (10 cores, 12 MB Intel Smart Cache, 15 W), and the 

Windows 11 operating system

N09663-601

Equipped with an Intel Core i5-1240P 1.7 GHz processor (12 cores, 12 MB Intel Smart Cache, 28 W), and the 

Windows 11 operating system

N09660-601

Equipped with an Intel Core i5-1235U 1.3 GHz (turbo up to 4.4 GHz) processor (10 cores, 12 MB Intel Smart 

Cache, 15 W), an RTX2050 graphics controller with 4 GB of discrete graphics subsystem memory, and the 

Windows 11 operating system

N09658-601

Equipped with an Intel Core i5-1235U 1.3 GHz (turbo up to 4.4 GHz) processor (10 cores, 12 MB Intel Smart 

Cache, 15 W), a graphics subsystem with UMA memory, and the Windows 11 operating system

N09661-601

Before removing the system board, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 34

).

2.

Remove the bottom cover (see 

Bottom cover on page 34

).

3.

Remove the battery (see 

Battery on page 36

).

56

Chapter 5  Removal and replacement procedures for authorized service provider parts

Summary of Contents for 15-ew0 Series





































































































Reviews:

No comments