manualshive.com logo in svg

HP 15-ew0 Series, Maintenance And Service Manual, Page: 28 / 100

Share
Download
HP 15-ew0 Series Maintenance And Service Manual Download Page 28

Table 3-2

Display component descriptions and part numbers (continued)

Item

Component

Spare part number

39.6 cm (15.6 in), LCD, FHD (1920 × 1080), WLED, antiglare, UWVA, 45% CG, eDP 1.2 without PSR, 

VWE, bent, TOP display panel with narrow bezel; typical brightness: 250 nits

N09665-001

Display Tape Kit (not illustrated)

N09657-001

(2a)

Webcam/microphone module (includes double-sided adhesive)

N09654-001

Webcam/microphone module thermal pad (not illustrated)

N13908-001

(2b)

Webcam/microphone module cable (includes double-sided adhesive)

N09651-001

(3)

OLED module (for use only on computer models equipped with a display assembly with an OLED 

display panel; includes double-sided adhesive)

N09652-001

(4)

Display panel cable (includes ambient light sensor module cable):

For use on computer models equipped with a display assembly with an OLED display panel

N09650-001

For use on computer models equipped with a display assembly with a QHD display panel

N09649-001

For use on computer models equipped with a display panel with an FHD display panel

N09648-001

(5a)

Display Hinge Kit (includes left and right hinges)

N09646-001

(5b)

Display hinge covers (2, includes left and right hinge caps):

In natural silver finish

N10778-001

In nightfall black finish

N09647-001

(6)

Wireless Antenna Kit (includes left and right WLAN antenna cables and transceivers and double-sided adhesive):

For use on computer models equipped with a display assembly with an OLED display panel

N13085-001

For use on computer models equipped with a display assembly with a QHD display panel

N13168-001

For use on computer models equipped with a display panel with an FHD display panel

N09643-001

(7)

Display back cover (includes left and right WLAN antenna cables and transceivers and double-sided adhesive):

In natural silver finish:

For use on computer models equipped with a display assembly with a QHD display panel

N13170-001

For use on computer models equipped with a display assembly with an OLED display panel

N13087-001

For use on computer models equipped with a display panel with an FHD display panel

N09645-001

In nightfall black finish:

For use on computer models equipped with a display assembly with a QHD display panel

N13169-001

For use on computer models equipped with a display assembly with an OLED display panel

N13086-001

For use on computer models equipped with a display panel with an FHD display panel

N09644-001

Mass storage devices

To identify the mass storage devices, use this illustration and table.

22

Chapter 3  Illustrated parts catalog

Summary of Contents for 15-ew0 Series





































































































Reviews:

No comments