manualshive.com logo in svg

HP 15-ew0 Series, Maintenance And Service Manual, Page: 26 / 100

Share
Download
HP 15-ew0 Series Maintenance And Service Manual Download Page 26

Table 3-1

Computer major component descriptions and part numbers (continued)

Item

Component

Spare part number

(8)

Infrared sensor cable

N09639-001

(9)

Heat sink (includes captive screws and replacement thermal material):

For use on computer models equipped with a graphics subsystem with discrete memory

N09633-001

For use on computer models equipped with a graphics subsystem with UMA memory and a 28 W 

processor

N09632-001

For use on computer models equipped with a graphics subsystem with UMA memory and a 15 W 

processor

N09631-001

(10a)

System board (includes integrated processor and replacement thermal material):

Equipped with an Intel Core i7-1260P 1.6 GHz processor (12 cores, 18 MB Intel Smart Cache, 28 W), 

and the Windows 11 operating system

N09662-601

Equipped with an Intel Core i7-1255U 1.7 GHz processor (10 cores, 12 MB Intel Smart Cache, 15 W), an 

RTX2050 graphics controller with 4 GB of discrete graphics subsystem memory, and the Windows 11 

operating system

N09659-601

Equipped with an Intel Core i7-1255U 1.7 GHz processor (10 cores, 12 MB Intel Smart Cache, 15 W), 

and the Windows 11 operating system

N09663-601

Equipped with an Intel Core i5-1240P 1.7 GHz processor (12 cores, 12 MB Intel Smart Cache, 28 W), 

and the Windows 11 operating system

N09660-601

Equipped with an Intel Core i5-1235U 1.3 GHz (turbo up to 4.4 GHz) processor (10 cores, 12 MB 

Intel Smart Cache, 15 W), an RTX2050 graphics controller with 4 GB of discrete graphics subsystem 

memory, and the Windows 11 operating system

N09658-601

Equipped with an Intel Core i5-1235U 1.3 GHz (turbo up to 4.4 GHz) processor (10 cores, 12 MB Intel 

Smart Cache, 15 W), a graphics subsystem with UMA memory, and the Windows 11 operating system

N09661-601

(10b)

I/O bracket: The I/O bracket is not available as a spare part component.

(11)

Speakers (includes cables, left and right speakers, and 2 rubber isolators)

N09638-001

(12)

3 cell, 51 Whr, 4.45 Ahr, LI battery (includes cable)

M77034-006

(13)

Bottom cover:

In natural silver finish

N09629-001

In nightfall black finish

N09628-001

Display assembly subcomponents

To identify the display assembly subcomponents, use this illustration and table.

20

Chapter 3  Illustrated parts catalog

Summary of Contents for 15-ew0 Series





































































































Reviews:

No comments