HP 14 TouchSmart Maintenance And Service Manual Download Page 20

Page: 20 / 146

Left side

Component

Description

(1)

Security cable slot

Attaches an optional security cable to the computer.

NOTE:

The security cable is designed to act as a deterrent, but

it may not prevent the computer from being mishandled or

stolen.

(2)

Power connector

Connects an AC adapter.

(3)

AC adapter light

●

On: The AC adapter is connected and the battery is

charged.

●

Amber: The AC adapter is connected and the battery is

charging.

●

Off: The computer is using battery power.

(4)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal for

the internal fan to cycle on and off during routine operation.

(5)

External monitor port

Connects an external VGA monitor or projector.

(6)

RJ-45 (network) jack/status lights

Connects a network cable.

●

White: The network is connected.

●

Amber: Activity is occurring on the network.

(7)

HDMI port

Connects an optional video or audio device, such as a high-

definition television, any compatible digital or audio

component, or a high-speed HDMI device.

(8)

USB 3.0 port

Connects an optional USB device, such as a keyboard, mouse,

external drive, printer, scanner or USB hub.

(9)

Audio-out (headphone)/Audio-in (microphone)

jack

Connects optional powered stereo speakers, headphones,

earbuds, a headset, or a television audio cable. Also connects an

optional headset microphone. This jack does not support

optional microphone-only devices.

WARNING!

To reduce the risk of personal injury, adjust the

volume before putting on headphones, earbuds, or a headset.

For additional safety information, refer to the

Regulatory,

Safety, and Environmental Notices

. To access this guide in

Windows 8, from the Start screen, type

support

, and then

select the

HP Support Assistant

app.

Chapter 2 External component identification

Summary of Contents for 14 TouchSmart



















































































































































Search results

Summary of Contents for 14 TouchSmart

Reviews:

Related manuals for 14 TouchSmart

Brands by name

Popular brands

HP 14 TouchSmart, Maintenance And Service Manual

Search results

Summary of Contents for 14 TouchSmart

Reviews:

Related manuals for 14 TouchSmart

Brands by name

Popular brands