background image

Category

Description

Non-touch ;

UMA

Non-touch;

discrete

Touch;

UMA

Touch;

discrete

 

Supports up to 16 GB of system RAM in the following

configurations:

16384-MB total system memory (8192×2; not supported

on a 32-bit operating system)

12288-MB total system memory (8192×1 + 4096×1; not

supported on a 32-bit operating system)

8192-MB total system memory (8192×1 or 4096×2)

6144-MB total system memory (4096×1 + 2048×1; not

supported on a 32-bit operating system)

4096-MB total system memory (4096×1 or 2048×2)

2048-MB total system memory (2048×1)

Hard drives

Supports 

6.35-cm

 (2.5-in) hard drives in 

9.5-mm

 (.37-in) and

7.0-mm

 (.28-in) thicknesses

Customer-accessible

Serial ATA

 

Supports the following hard drives:

1-TB, 5400-rpm, 9.5-mm

750-GB, 5400-rpm, 9.5-mm

500-GB, 5400-rpm, 9.5-mm or 7.0-mm

320-GB, 5400-rpm, 9.5-mm or 7.0-mm

Optical drive

Fixed

Serial ATA

9.5-mm tray load

 

DVD+/-RW Double-Layer SuperMulti

 

Supports zero power optical drive

 

Supports no optical drive option

 

 

Audio/video

Single digital microphone

 HD 

audio

 Dual 

speakers

 

HP TrueVision HD webcam (fixed, no tilt with activity LED,

1280×720 by 30 frames per second)

Ethernet

Integrated 10/100 network interface card (NIC)

Integrated 10/100/1000 NIC (HP 240 models)

Wireless

Integrated wireless local area network (WLAN) options by way

of wireless module

One or two WLAN antennas built into display assembly

Compatible with Miracast-certified devices (For Win8.1; except

Intel Pentium and Celeron)

Support for the following WLAN formats:

2

Chapter 1   Product description

Summary of Contents for 14 TouchSmart



















































































































































Reviews: