HP 14 TouchSmart Maintenance And Service Manual Download Page 122

Page: 122 / 146

Restore and recovery

Restoring to a previous system restore point

Sometimes installing a software program causes your computer or Windows to behave unpredictably.

Usually uninstalling the software fixes the problems. If uninstalling does not fix the problems, you can

restore the computer to a previous system restore point (created at an earlier date and time).
To restore to a previous system restore point, when the computer was running correctly:

Select

Start

Control Panel

System and Security

System

In the left pane, click

System Protection

Click the

System Protection

tab.

Click

System Restore

, and follow the on-screen instructions.

Restoring specific files

If files are accidentally deleted from the hard disk and they can no longer be restored from the Recycle Bin, or

if files become corrupt, restoring specific files is useful. Restoring specific files is also useful if you ever

choose to recover the original system using HP Recovery Manager. You can only restore specific files that you

have backed up before.

Restoring specific files using Windows Backup and Restore

Windows allows you to restore files that were backed up using Windows Backup and Restore:

Select

Start

Control Panel

System and Security

Backup and Restore

Follow the on-screen instructions to restore your backup.

NOTE:

Windows includes the User Account Control feature to improve the security of the computer. You

may be prompted for your permission or password for tasks such as installing software, running utilities, or

changing Windows settings. See Help and Support for more information.

Recovering the original system using HP Recovery Manager

HP Recovery Manager software allows you to repair or recover the computer to its original factory state.

What you need to know

●

HP Recovery Manager recovers only software that was installed at the factory. For software not

provided with this computer, you must either download the software from the manufacturer's website

or reinstall the software from the disc provided by the manufacturer.

●

A system recovery should be used as a final attempt to correct computer issues. If you have not already

tried restore points (see

Restoring to a previous system restore point on page 114

) and partial restores

(see

Restoring specific files on page 114

), try them before using HP Recovery Manager to recover your

system.

●

A system recovery must be performed if the computer hard drive fails or if all attempts to correct any

functional computer issues fail.

114 Chapter 10 Backing up, restoring, and recovering in Windows 7

Summary of Contents for 14 TouchSmart



















































































































































Search results

Summary of Contents for 14 TouchSmart

Reviews:

Related manuals for 14 TouchSmart

Brands by name

Popular brands

HP 14 TouchSmart, Maintenance And Service Manual

Search results

Summary of Contents for 14 TouchSmart

Reviews:

Related manuals for 14 TouchSmart

Brands by name

Popular brands