100
60043599 • 02 • 03/2021 • en
25 Configuration
25.1 Speed
1
2
3
4
0.0
0.0
km/h
km/h
1
Display of the minimum and maximum possible travel speed.
The values (if available) are calculated from the currently entered target values
for the product.
2
Display of the current speed as bar graph and as number.
The red bars show the permissible speed range (see item 1).
3
Buttons for selecting the speed signal.
The signal of the machine radar can always be selected since it is available on
the wiring loom. This requires a sensor on the wiring loom.
The other speed sources can only be selected if they are available on the ISO-
BUS. Other buttons are not active.
4
Option of entering a simulation speed, for example, to perform function checks
on the machine.
The following speed source are available:
GPS signal
Tractor ECU
(Tractor-wheel speed)
Tractor ECU
(Tractor-radar speed)
Machine radar
