Care and maintenance | 10
60043599 • 02 • 03/2021 • en
73
10.3 Clean the machine
Ø
Clean the machine thoroughly at regular intervals and after the end of the sea-
son.
Ø
Wear the necessary protective outfit when performing any work to protect
your health and safety.
NOTE
Ø
Do not clean electrical components, hydraulic cylinders and bearings with a
high pressure cleaner or direct water jet.
Housings, screw fittings and bearings are not waterproof under high pressure.
Ø
Clean every day when in use.
10.4 Machine storage
The following steps must be followed if the machine is to be shut down for a longer
period of time:
1. Park the machine in a hall or under a roof if possible.
2. Secure the machine with wheel chocks against rolling away.
3. Loosen the parking brake, if so equipped, to prevent the brake pads from
sticking.
4. Protect the machine against corrosion. For spray coating use only biodegrad-
able oils.
5. Protect the hydraulic cylinder piston rods against corrosion.
6. Relieve the wheels from any load.
