2 | Safety and responsibility
20
60043599 • 02 • 03/2021 • en
Ø
After cleaning, check all hydraulic lines for leaks and loose connections.
Ø
Check for chafing and signs of damage. Remedy any faults immediately!
Ø
Retighten screw connections loosened for care and maintenance work.
Ø
Do not clean new machines with a steam jet of a high pressure cleaner. The
paint takes approx. 3 months to cure and could be damaged before this time.
Ø
Danger of explosion! Do not exceed the specified tire pressure, see
Mainten-
ance overview
.
NOTE
All other maintenance and repair tasks, which are not described in the operating in-
structions, must only be carried out by an authorized professional workshop or by
an operator who has been trained by HORSCH for this purpose.
2.9 Danger zone
The area indicates the danger zone of the machine:
The danger zone around the machine poses the following hazards:
• Accidental operation of the hydraulics can trigger dangerous movements of the
machine.
• With the drive still running, machine parts may rotate or swing out.
• Hydraulically raised machine parts can lower slowly and unnoticed.
Failing to pay attention to the danger zone can result in severe or even fatal physical
injuries.
1. Do not stand under lifted loads. Lower such loads to the ground first.
2. Instruct persons to leave the danger zone around the machine and tractor be-
fore any machine movements.
3. Before working in the danger zone of the machine or between machine and
tractor:
Shut down the tractor!
This also applies to temporary inspection work.
Many accidents happen because of carelessness and running machines!
4. Pay attention to the information in all operating instructions.
