6 | Operation
40
60043599 • 02 • 03/2021 • en
1
2
Supports in transport position
1
Bolt for securing the supports (secured with cotter pin)
2
Supports
6. Connect the machine controls to the ISOBUS socket of the tractor.
7. Connect the hydraulic lines, see chapter
Hydraulics
.
8. Connect the lighting equipment.
6.2.2 Transport position
WARNING
Danger of traffic accidents
Before driving off:
Ø
Clean all picked up soil from the entire machine.
Ø
Check function of lighting system.
Ø
Lock the control units mechanically or electrically, depending on the version,
during transport travel. Never switch them to the floating position.
Ø
Check all interlocks before starting to drive.
Ø
Check whether all securing elements of the connection are in place as set cor-
rectly.
Ø
Check components of the connection for wear.
NOTE
Ø
Make sure before driving on public roads that the machine meets all respect-
ive applicable national road traffic regulations.
Make the following additional adjustments before road transport:
1. Lift the coulter completely.
2. Disable the hydraulic control units in the tractor and secure them against re-
start.
3. Turn the
Field-Road
valve to the
Road
position.
4. Adjust the tractor link arm on the tractor so that the maximum permissible
transport height is not exceeded.
5. Switch off the machine control.
