10 | Care and maintenance
72
60043599 • 02 • 03/2021 • en
10.2 Lubricating the machine
Ø
Lubricate the machine regularly and after each wash with a suitable grease
gun. This ensures operability and reduces repair costs and downtimes.
CAUTION
Handling lubricants
Lubricants and mineral oil products are no danger to health as long as they are
used as instructed.
Ø
Avoid prolonged skin contact or the inhalation of vapours.
Ø
Avoid direct contact with oils. Use gloves or protective creams.
Ø
Thoroughly clean any oil traces on the skin by washing off with water and
soap.
Ø
Never clean the skin with petrol, diesel or other solvents.
Ø
Observe the operating instructions of the grease gun used.
C
D
A
B
Lubrication points (here: Transformer 12 VF)
Lubrication points – number of lubrication points in parentheses (lubricating grease:
DIN 51825 KP/2K-40)
Linear guide (A, 2x)
lubricate (2)
40 h
Flap bearing bolt, front (B, 2x)
lubricate (2)
40 h
Flap bearing bolt, rear (C, 2x)
lubricate (2)
40 h
Upper link (D, 2x)
lubricate (2)
40 h
Lubrication points with the addition "2x" can be found on either side of the ma-
chine.
